Skip to content
Visit the store
Organization profile · Water mineral product

Aurmina

Concentrated ionic sulfate mineral salts · Direct online purchase · distributor access varies by market

A liquid mineral concentrate for preparing drinking water, available in single bottles and larger packs with water-specific dilution instructions.

Single bottle
· 8 fl oz
Estimated supply
About 3 months
Preparation
Directions vary by source water
Returns
30 days
Formula, directions, price and testing record checkedReviewed

Who they are

Overview

Aurmina is a liquid concentrate of ionic sulfate mineral salts that is diluted into drinking water. It is sold through the company’s online store in 8 fl oz and 32 fl oz bottles and as a pack of three 32 fl oz bottles. Preparation differs for tap, well, purified and spring water, and the company publishes guidance on dilution, settling and filtration alongside a library of its water-testing results.

At a glance

The current single-bottle offer and directions in one view.

Formula
2.5% ionic sulfate mineral salts
The product page lists 97.5% purified water and 2.5% ionic sulfate mineral salts.
Bottle
8 fl oz · about 3 months
Supply length depends on the dilution and water consumed.
Direction
The tap/well-water instructions include a settling period and filtration after dilution.
Policy
Review exclusions and the EU/EEA withdrawal rules on the current policy page.

Company claims

  • Reducing contaminants in water

    Aurmina reports reductions in more than 245 water contaminants after 24 hours in laboratory tests. The tests used water with contaminants added. It says results vary with the source water, amount used and treatment time. These are vendor-published water challenge results, not health outcomes in people or a safety certification for any drinking-water source.

Cost and quantity

Pricing

Single 8 fl oz bottle

8 fl oz of concentrate; supply duration depends on dilution and water use.

for one 8 fl oz bottle

US prices shown; shipping, taxes and international prices are set at checkout. The three-pack was listed against a crossed-out , so bundle pricing can change.

Company product pages checked 26 September 2026.

Services

Current routes

  • Aurmina three-pack · 3 × 32 fl oz

Water preparation

Preparing Aurmina water

Aurmina’s current guide separates tap/well, purified and spring-water preparation. The tap/well route includes three stages.

  1. Measure the concentrate

    For tap or well water, the guide starts with 1–2 teaspoons per gallon and varies the amount with the source water.

  2. Allow time to settle

    The tap/well instructions specify a 24–72-hour settling period.

  3. Separate and filter

    The company instructs users to pour off the clear water without disturbing the sediment, then pass it through a coffee or ceramic gravity filter.

Formula and testing

What the product record shows

The formula and water-testing record answer different questions.

  • Formula

    Ionic sulfate mineral salts

    The company lists a concentrate of 2.5% ionic sulfate mineral salts in purified water.

    The formula is a concentrated liquid that must be diluted.

  • Use

    Dilution in drinking water

    The product is mixed by teaspoon into a gallon of water.

    Preparation time and filtration vary with the type of source water.

  • Testing

    Laboratory water challenge panels

    Company-published results summarize analytes reduced under specified test conditions.

    Laboratory water results do not establish a health benefit or guarantee that any given water source is safe to drink.

Purchase and returns

Access

Direct purchase is online; shipping and withdrawal rights vary by destination.

Direct purchase
The product page shows current price and destination availability.
Returns
Use the current refund policy for exclusions and instructions.
EU and EEA
The published policy describes a separate statutory withdrawal route for eligible buyers.

Laboratory water analysis

Water testing and research

Aurmina’s science page describes two different kinds of water analysis: mineral-content testing and contaminant-reduction testing.

Company-published testing

  • A TestAmerica Laboratories report dated 8 July 2014 measured the elements present in three water samples using EPA Method 6020. Aurmina says this analysis was commissioned by environmental chemist Paul Rosenfeld.

  • Aurmina separately describes contaminant-reduction testing by Envirotek Laboratories between 2008 and 2015. Those tests concern water samples and test conditions, not health outcomes in people.

Limits of the current record

  • The published panels test prepared water samples, not health outcomes in people.

  • Results depend on the source water and test conditions; these panels do not establish that every treated water source is safe to drink.

Before buying

Make the product decision practical

The important practical differences are preparation time, water source and dilution.

Water

Start with your source water

If contaminant reduction is the goal, compare the published panel with the substances actually present in your water.

Routine

Check the dilution and supply math

Estimate how many gallons you prepare and whether the bottle will last the company-stated three months for your use.

Size

Match the bottle to the order

The 32 fl oz bottle and the three-pack of 32 fl oz bottles are different products from the 8 fl oz bottle, so confirm the size in the cart.

Common questions

Frequently asked questions

Transparency

Transparency and sources

Researched by Longevity.io

Reviewed

Directory listings are for informational purposes only. Inclusion does not constitute endorsement. Verify credentials and qualifications independently.

Keep exploring

Your Longevity Blueprint

Build your starting plan.

A few short questions, about two minutes. The Blueprint recommends where to start and explains why.

Build my Blueprint